Mobile Grain Feeders

ADVANTAGES

Mobile Grain Feeders give farmers the convenience of filling the feeders up at a silo and taking them out to the paddock. They are also ideal for rotational grazing systems. The tandem axle kit, the MGF3800, can be connected the NGF3800 and the single axle kit, the MGF1800, can be connected to the NGF1800.

SUSPENSION

An important feature of Advantage Feeders Mobile Grain Feeders is that they have suspension. This ensures the longevity of the products by providing smooth transportation.

The suspension also allows farmers to pull the Mobile Grain Feeders at higher speeds because it can endure hitting bumps. This can save a lot of time if the feeders have to be towed more than a couple kilometres.

The MGF3800 has load sharing springs. This ensures they can carry higher loads.

MGF Suspension

CENTRAL WHEEL POSITION

Centralised axles reduces the load on the tow ball of the pulling vehicle. This is very important when the vehicle is a ute. Other products that have the axle at the rear of the feeder can put up to 800kg on the tow ball when many utes have maximum loading of 300kg.

The tyres are only 450mm high, being 195/55/R13C and have a load rating of 900kg each. Stock can reach over the wheels to consume. Lambs that are less than 4 months of age will have to consume besides the wheels.

MGF Central Wheel Position

MGF3800

Cradle Hay Feeder

(Lead time is 3-4 months)

Assembled on:

NGF3800

Tare Weight:

500 kg

Maximum Load:

2500 kg

Gross Weight:

3000 kg

Flat-packed Dimensions:

2450 x 1160 x 200 (LxWxH)


Click here to see prices

MGF1800

Cradle Hay Feeder


Assembled on:

NGF1800

Tare Weight:

400 kg

Maximum Load:

1100 kg

Gross Weight:

1500 kg

Flat-packed Dimensions:

2450 x 1160 x 200 (LxWxH)


Click here to see prices

TELESCOPIC STANDS

The Mobile Grain Feeders have a stand in each corner. These prevent the Mobile Grain Feeders moving when in use.

Stand down

Stand up

MGF1800 FILLING DIMENSIONS

Many farmers with Mobile Advantage Feeders reverse the feeder under a silo or hopper to conveniently load them. See the dimensions below for the MGF1800 set at sheep height. Note the roof stop has been repositioned in this image.

MGF1800 Filling Dimensions

ADJUSTABLE AXLE HEIGHT

The axles are manufactured with a step. This allows the Mobile Grain Feeders to be set at 3 different heights so they are suitable for all sizes of stock. The axle options allow the trough to be set at the heights of approximately 300, 400 and 500mm.

Axle positioned so trough set at 300mm

Axle positioned so trough set at 400mm

Axle positioned so trough set at 500mm